CONTROL LINE STRAIGHTENING TOOL
The Control Line Straightening Tool is designed to straighten short lengths of control lines manufactured from all varieties of CRA alloys and sizes from ¼”OD to ¾”OD bare line, encapsulated line and multi-line flat packs. Its principal use is for precision straightening over short intervals to be coned and threaded for Butech/Autoclave connections. A secondary use is for general straightening and removal of “kinks” to allow the lines to have good conformance alongside tubing strings.
The Control Line Straightening Tool l employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom-made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.
*The Control Line Straightening Tool is not designed to produce “straight stick” lengths of tubing.
How it Works
Components
The control line straightening tool employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.
- A hydraulic power unit (HPU) that generates hydraulic energy from a compressed air source.
- A control line straightening tool that grips tubing requiring straightening and re-shapes it by re-forming its curvature.
- A hydraulic hose bundle to deliver pressurized oil to the straightener unit and returns it to the HPU.
Model Number
- PHC-HYD-STRAIGHT
- PHC-HYD-B-TSI-.250
- PHC-HYD-B-TSI-.375
- PHC-HYD-B-TSI-.500
- PHC-HYD-B-TSI-.625
- PHC-HYD-E-TSI-.250
- PHC-HYD-E-TSI-.375
- PHC-HYD-E-TSI-.500
- PHC-HYD-E-TSI-.625
Description
- Straightening Tool
- 1/4" Insert for Staightening Tool (Bare Line)
- 3/8" Insert for Staightening Tool (Bare Line)
- 1/2" Insert for Staightening Tool (Bare Line)
- 5/8" Insert for Staightening Tool (Bare Line)
- 1/4" Insert for Staightening Tool (Encap sulated line)
- 3/8" Insert for Staightening Tool (Encap sulated line)
- 1/2" Insert for Staightening Tool (Encap sulated line)
- 5/8" Insert for Staightening Tool (Encap sulated line)
We can source many other manfacturers/brands and products. If you you do not see your requirement listed, please contact us and let us source it.